i Gig Book

Hello,
I have 2 ipads(different ones with different OS inside).
Is it possible to setup igigbook to set 2 consecutive Pages of the same score in the two ipads automatically?
How could i setup the two ipads and igigbook?
Thanks!

stefanob wrote: ↑Sun Nov 25, 2018 4:46 am Hello,
I have 2 ipads(different ones with different OS inside).
Is it possible to setup igigbook to set 2 consecutive Pages of the same score in the two ipads automatically?
How could i setup the two ipads and igigbook?
Thanks!

Take a look at the iGigBook Pager app.

Thanks!
Is it also possible to change Pages through a midi pedalboard?

stefanob wrote: ↑Sun Nov 25, 2018 10:32 am Thanks!
Is it also possible to change Pages through a midi pedalboard?

iGigBook does not turn pages with MIDI, though it does turn pages using the iRig Blueboard.

Hi,
Thanks for tour reply.
Does it work with blueturn too?

Phil Smith wrote: ↑Sun Nov 25, 2018 9:11 am

stefanob wrote: ↑Sun Nov 25, 2018 4:46 am Hello,
I have 2 ipads(different ones with different OS inside).
Is it possible to setup igigbook to set 2 consecutive Pages of the same score in the two ipads automatically?
How could i setup the two ipads and igigbook?
Thanks!

Take a look at the iGigBook Pager app.

Hi, i tried igigbook pager app and it works great!
But i asked for different thing:
2 ipads : one named device "master" , the other one as device "slave" . I assume i have igigbook on both ipads with the same files inside and opened in both ipads. The slave one "copies" exactly the same page in the same book of "master" device. In this way i may have the same page on both. Then with a simple click on "slave" device turns one page and i may have 2 pages in two different devices.
I try to post it in "feature request" section of the forum.
Is there any other way to have 2 ipads with 2 different consecutive pages almost automatically?
Thanks
stefano

iGigBook Pager can turn pages on multiple devices.

yes, i tried it and it works! But i asked for another feature and i posted it in the "wishlist" section.
In the meanwhile i may setup the pdf of the whole concert in both ipad devices and i can shirt manually the first page and then, through igigbook pager app, have the correct sequence page1-page2 of the files on both devices.

Hello,
I picked up The iGigbook Pager app today because I now have two iPads. A brand new one and a fourth generation model which are now both synchronized with with iGigbook file data.
I was able to get two other apps (Unrealbook and ForScore working by (purchased an App called Cue for ForScore needed on both iPads and just enabling the feature in UnRealBook) to work with displaying one page on the first iPad and the second page on the second iPad,
I purchased the iGigbook pager app thru the Apple Store.

I can’t figure out a how to make it work though.
The configuration page just shows me top button, bottom button, single switch, and motion, detect options and a sensitivity slider.
When I click on done, it just shows me next or previous page.
Neither of which will let me type in a name of which iPad it should point to.

Although I have an iPhone, I’d prefer not to use it if that iGigbook Pager app would just work on one or both of the iPads.
I installed the app all three devices though.
My set up is probably a little bit more complicated since I have a Pageflip Firefly pedal connected to iPad one and I have Apple mouse and keyboard sharing set up from my MAC to the first iPad as well to type in song titles in the three programs.
If this does require me to connect that pedal to my iPhone To advance pages in IGigBook then I don’t think that will work for me because it can only connect to one pageflip pedal device to one device at a time and it needs to be connected to iPad one for the other programs.
Does this Pager app absolutely require the iPhone to connect Igigbook on the two iPads together for displaying page one and two separate separately.
Thank You
Curt

Curt Foster wrote: ↑Thu May 14, 2026 7:00 pmI can’t figure out a how to make it work though.
The configuration page just shows me top button, bottom button, single switch, and motion, detect options and a sensitivity slider.
When I click on done, it just shows me next or previous page.
Neither of which will let me type in a name of which iPad it should point to.

The app connects with iPads that are running iGigBook and viewing a PDF page. It connects to the devices automatically that have the same "Connection ID" You should check out the Help section in the iGigBook Pager app.

Although I have an iPhone, I’d prefer not to use it if that iGigbook Pager app would just work on one or both of the iPads.
I installed the app all three devices though.
My set up is probably a little bit more complicated since I have a Pageflip Firefly pedal connected to iPad one and I have Apple mouse and keyboard sharing set up from my MAC to the first iPad as well to type in song titles in the three programs.
If this does require me to connect that pedal to my iPhone To advance pages in IGigBook then I don’t think that will work for me because it can only connect to one pageflip pedal device to one device at a time and it needs to be connected to iPad one for the other programs.
Does this Pager app absolutely require the iPhone to connect Igigbook on the two iPads together for displaying page one and two separate separately.
Thank You
Curt

Try getting the iGigBook Pager to work with your two iPads at first. Technically you can install iGigBook Pager on an iPad but it still functions as an iPhone app should perform the same. We haven't tested that out because that's not how people use it.